| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 21.53/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SPECIFICATIONS | |||
| OUTPUT | |||
| Model | MDR-100-12 | MDR-100-24 | MDR-100-48 |
| DC Voltage | 12V | 24V | 48V |
| Rated Current | 7.5A | 4A | 2A |
| Current Range | 0-7.5A | 0-4A | 0-2A |
| Rated Power | 90W | 96W | 96W |
| Ripple & Noise | 120mVp-p | 120mVp-p | 150mVp-p |
| Voltage Adj. Range | 12-15V | 24-30V | 48-56V |
| Voltage Tolerance | ±1% | ±1% | ±1% |
| Line regulation | ±1% | ±1% | ±1% |
| Load regulation | ±1% | ±1% | ±1% |
| Setup, Rise Time | 3000ms,50ms/230VAC 3000ms,50ms/115VAC at full load | ||
| Hold Up Time | 50ms/230VAC 20ms/115VAC at full load | ||
| Voltage Range | 85~264VAC 47~63 Hz; 120~370VDC | ||
| AC Current | 1.3A/115VAC 0.8A/230VAC | ||
| Efficiency | 83% | 86% | 87% |
| Inrush Current | Cold start 30A/115VAC 60A/230VAC | ||
| Leakage Current | <1mA/240VAC | ||
| Over Load | 105%~150% rated output power | ||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||
| Over Voltage | 15.6-18V | 31.2-36V | 57.6-64.8V |
| Protection type: Shut down o/p voltage, re-power on to recover | |||
| Over Temp. | Protection type: Shut down o/p voltage, recovers automatically or re-power on recover | ||
| DC OK signal | Relay contact rating(max):30V/1A resistive | ||
| Working Temp., Humidity | -10ºC~+60ºC; 20%~90% RH non-condensing | ||
| Storage Temp., Humidity | -40ºC~+85ºC; 10%~95%RH | ||
| Temp. Coefficient | ±0.03%/ºC(0~50ºC) | ||
| Vibration | 10~500Hz, 2G 10min./1cycle, 60min, each along X, Y, Z axes | ||
| Withstand Voltage | I/P-O/P: 3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-F/G: >100M Ohms / 500VDC/25ºC/70% RH | ||
| Safety Standard | Design refer to UL508, TUV EN60950-1 | ||
| EMC Standard | EN61240-3,EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2, EN61204-3,heavy industry level, criteria A | ||
| Dimension | 55*90*100mm(W*H*D) | ||
| Weight | 0.42Kg | ||
| Packing | 30pcs/13.6Kg/0.82CUFT | ||
| NOTE | |||
| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|||
){kind=link}