| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 618.79/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SPECIFICATIONS | |||
| OUTPUT | |||
| Model | SV-5000-30 | SV-5000-40 | SV-5000-110 |
| DC Voltage | 30V | 40V | 110V |
| Rated Current | 167.0A | 120.0A | 45.0A |
| Current Range | 0-167.0A | 0-120.0A | 0-45.0A |
| Ripple & Noise | 0.50% | 0.50% | 0.50% |
| Voltage Adj. Range | 0-30V | 0-40V | 0-110V |
| Setup&Rise Time | 100ms,50ms at full load | ||
| Hold Up Time | 20ms at full load | ||
| INPUT | |||
| Voltage Range | AC220V±20% 47~63HZ | ||
| AC Current | 3.2A/115V 1.6A/230V | ||
| Efficiency | 86% | 87% | 89% |
| Inrush Current | 40A/230V | ||
| Leakage Current | <0.5MA/230VAC | ||
| PROTECTION | |||
| Over Load | 110~150% | ||
| Protection type: Shut down o/p voltage, re-power on to recover | |||
| Over Voltage | 115~150% | ||
| Protection type: Shut down o/p voltage, re-power on to recover | |||
| SAFETY | |||
| Withstand Voltage | I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min | ||
| Isolation Resistance | O/P-F/G:0.5KVAC /1min | ||
| Size | 500*500*150mm | ||
| NOTE | |||
| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|||
){kind=link}