| Output Type: | Single |
|---|---|
| Warranty: | 2 Years |
| Output Power: | 51 - 100W |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | SPECIFICATIONS | ||||||
| OUTPUT | ||||||
| Model | LPV-60-5 | LPV-60-12 | LPV-60-15 | LPV-60-24 | LPV-60-36 | LPV-60-48 |
| DC Voltage | 5V | 12V | 15V | 24V | 36V | 48V |
| Rated Current | 8A | 5A | 4A | 2.5A | 1.67A | 1.25A |
| Current Range | 0-8A | 0-5A | 0-4A | 0-2.5A | 0-1.67A | 0-1.25A |
| Rated Power | 40W | 60W | 60W | 60W | 60W | 60W |
| Ripple & Noise | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p | 150mVp-p |
| Voltage Tolerance | ±8% | ±5% | ||||
| Line Regulation | ±1% | |||||
| Load Regulation | ±6% | ±2% | ||||
| Setup, Rise Time | 500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load(for 5-36V) 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load(for 48V) |
|||||
| Hold Up Time | 50ms/230VAC 16ms/115VAC at full load | |||||
| INPUT | ||||||
| Voltage Range | 90~264VAC 47-63Hz; 127~370VDC | |||||
| AC Current | 1.2A/115V 1A/230V | |||||
| Efficiency | 76% | 83% | 83% | 86% | 86% | 86% |
| Inrush Current | Cold Start 60A at 230VAC | |||||
| Leakage Current | 0.25mA/240VAC | |||||
| PROTECTION | ||||||
| Over Load | 110-150% rated output power | |||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||
| Over Voltage | 5.75-6.75V | 13.8-16.2V | 17.25-20.25V | 27.6-32.4V | 41.4-48.6V | 55.2-64.8V |
| Protection type: Shut down o/p voltage, re-power on to recover | ||||||
| ENVIRONMENT | ||||||
| Working Temp.Humidity | -30 ~ +70ºC (Refer to "Derating Curve") | |||||
| Storage Temp.Humidity | -40ºC~+80ºC; 10%~95%RH | |||||
| Temp.Coefficient | ±0.03%/ºC(0~50ºC) | |||||
| Vibration | 10~500Hz,2G 10min,/1cycle,period for 60min,each along X,Y,Z axes | |||||
| SAFETY | ||||||
| Withstand Voltage | I/P-O/P:3KVAC | |||||
| Isolation Resistance | I/P-O/P>100M Ohms / 500VDC / 25ºC / 70% RH | |||||
| STANDARD | ||||||
| Safety Standard | UL879(expect for LPV-60-5), UL1310(expect for LPV-60-5), CSA C22.2 No.207-M91(expect for LPV-60-5, LPV-60-48), IP67, IEC60950-1:2005+A2:2013 approved; design refer to TUV EN60950-1 | |||||
| EMC Standard | EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A | |||||
| OTHERS | ||||||
| Dimension | 162.5*42.5*32mm(L*W*H) | |||||
| Weight | 0.4kg;32pcs/13.8kg/0.56CUFT | |||||
| NOTE | ||||||
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Derating may not be needed under low input voltage. Please check the static characteristics for more details. |
||||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}