Leyu Household Appliance 75W 12V 24 48V Power Supply

Product Description

Product Description

 

Product Parameters

 

SPECIFICATION
OUTPUT
Model	LRS-75-5	LRS-75-12	LRS-75-15	LRS-75-24	LRS-75-36	LRS-75-48
DC Voltage	5V	12V	15V	24V	36V	48V
Rated Current	14A	6A	5A	3.2A	2.1A	1.6A
Current Range	0~14A	0~6A	0~5A	0~3.2A	0~2.1A	0~1.6A
Rated Power	70W	72W	75W	76.8W	75.6W	76.8W
Ripple & Noise	100mVp-p	120mVp-p	120mVp-p	150mVp-p	200mVp-p	200mVp-p
Voltage Adj. Range	4.5 ~ 5.5V	10.2~ 13.8V	13.5~18V	21.6~28.8V	32.4~39.6V	43.2~52.8V
Voltage Tolerance	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load Regulation	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Setup, Rise Time	500ms, 30ms/230VAC   500ms, 30ms/115VAC at full load
Hold Up Time	60ms/230VAC   12ms/115VAC at full load
Voltage Range	85 ~ 264VAC    120 ~ 373VDC
Frequency Range	47 ~ 63Hz
Efficiency	86.5%	89%	89%	90%	91.5%	91.5%
AC Current	1.4A/115VAC  0.85A/230VAC
Inrush Current	Cold start 50A/230VAC
Leakage Current	<0.75mA / 240VAC
Over Load	110 ~ 150% rated output power
	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75~6.75V	13.8 ~ 16.2V	18.75~21.75V	28.8 ~ 33.6V	41.4~48.6V	55.2~ 64.8V
	Protection type: shut down o/p voltage, re-power on to recover
Working Temp.	-30 ~ +70ºC (Refer to "derating curve")
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85ºC, 10 ~ 95% RH
Temp. Coefficient	±0.03%/ºC (0 ~ 50ºC)
Vibration	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
Safety Standards	UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved
Withstand Voltage	I/P-O/P:3.75KVAC   I/P-FG:2KVAC   O/P-FG:1.25KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH
EMC Emission	Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN 61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A
Dimension	99*82*30mm (L*W*H)
Weight	0.3Kg
Packing	45pcs/carton/14.5kg/0.77CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.