| SPECIFICATION |
|
| OUTPUT |
|
| Model |
LPV-35-5 |
LPV-35-12 |
LPV-35-15 |
LPV-35-24 |
LPV-35-36 |
| DC Voltage |
5V |
12V |
15V |
24V |
36V |
| Rated Current |
5A |
3A |
2.4A |
1.5A |
1A |
| Current Range |
0 ~ 6A |
0 ~ 3A |
0 ~ 2.4A |
0 ~ 1.5A |
0 ~ 1A |
| Rated Power |
30W |
36W |
36W |
36W |
36W |
| Ripple & Noise |
80mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
| Voltage Tolerance |
±6.0% |
±5.0% |
| Line Regulation |
±1.0% |
| Load Regulation |
±4.0% |
±2.0% |
| Setup, Rise Time |
500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load |
| Hold Up Time |
50ms/230VAC 16ms/115VAC at full load |
| Voltage Range |
90 ~ 264VAC 127 ~ 370VDC |
| Frequency Range |
47 ~ 63Hz |
| Efficiency |
77% |
84% |
84% |
85% |
85% |
| AC Current |
1.1A/115VAC 0.57A/230VAC |
| Inrush Current |
Cold Start 55A at 230VAC |
| Leakage Current |
0.25mA / 240VAC |
| Over Load |
110 ~ 150% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage |
5.75~6.75V |
13.8~16.2V |
17.25~20.25V |
27.6~32.4V |
41.4~48.6V |
| Protection type: Shut down o/p voltage, re-power on to recover |
| Working Temp. |
-30 ~ +65ºC (Refer to "Derating Curve") |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-40 ~ +80ºC, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/ºC (0 ~ 45ºC) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Safety Standards |
UL1310 class 2,CAN/CSA No.223-M91,CB IEC61347-2-13, IP67 approved, design refer to TUV EN60950-1 |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P>100M Ohms / 500VDC / 25ºC / 70% RH |
| EMC Emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A,EN61000-3-3 |
| EMC Immunity |
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, light industry level, criteria A |
| Dimension |
148*40*30mm (L*W*H) |
| Weight |
0.34Kg |
| Packing |
40pcs/14.6Kg/0.63CUFT |
| NOTE |
|
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. |
| 4.Derating may not be needed under low input voltage. Please check the static characteristics for more details. |
){kind=link}
){kind=link}