MDR-60-24isolated din rail type switching power supply
Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
isolation class
LED indicator for power on
100% full load burn-in test
2 years warranty
Product Parameters
| SPECIFICATIONS |
| OUTPUT |
|
| Model |
MDR-60-5 |
MDR-60-12 |
MDR-60-24 |
MDR-60-48 |
| DC Voltage |
5V |
12V |
24V |
48V |
| Rated Current |
10A |
5A |
2.5A |
1.25A |
| Current Range |
0-10A |
0-5A |
0-2.5A |
0-1.25A |
| Rated Power |
50W |
60W |
60W |
60W |
| Ripple & Noise |
80mVp-p |
120mVp-p |
150mVp-p |
200mVp-p |
| Voltage Tolerance |
±2% |
±1% |
±1% |
±1% |
| Line regulation |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Load regulation |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Setup, Rise Time |
500ms,30ms/230VAC 200ms,30ms/115VAC at full load |
| Hold Up Time |
50ms/230VAC 20ms/115VAC at full load |
| Voltage Range |
85~264VAC 47~63Hz; 120~370VDC |
| AC Current |
1.8A/115VAC 1A/ 230VAC |
| Efficiency |
78% |
86% |
88% |
87% |
| Inrush Current |
Cold start 30A/115VAC 60A/230VAC |
| Leakage Current |
<1mA/240VAC |
| Over Load |
105%~150% rated output power |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
6.25-7.25V |
15.6-18V |
31.2-36V |
57.6-64.8V |
| Protection type: Shut down o/p voltage, re-power on to recover |
| Working Temp., Humidity |
-20ºC~+70ºC; 20%~90% RH non-condensing |
| Storage Temp., Humidity |
-40ºC~+85ºC; 10%~95%RH |
| Temp. Coefficient |
±0.03%/ºC(0~50ºC) |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P: 3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-F/G: >100M Ohms / 500VDC/25ºC/70% RH |
| Safety Standard |
Design refer to UL508, UL60950-1,TUV EN60950-1,EN50178 |
| EMC Standard |
Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2,EN61204-3, heavy industry level, criteria A |
| Dimension |
40*90*100mm(W*H*D) |
| Weight |
0.33Kg |
| Packing |
42pcs/carton/14.8kg/0.82CUFT |
| NOTE |
|
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
){kind=link}