Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | 2 Years |
Still deciding? Get samples of US$ 6.72/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
CE factory direct sales LRS-75-48 single output High quality dc 75w 48v power supply
Features:
AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit / Overload / Over voltage/ Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70ºC
High efficiency, long life and high reliability
2 years warranty
more efficient, more thinner, less no-load consumption than old series
SPECIFICATION |
||||||
OUTPUT |
||||||
Model |
LRS-75-5 |
LRS-75-12 |
LRS-75-15 |
LRS-75-24 |
LRS-75-36 |
LRS-75-48 |
DC Voltage |
5V |
12V |
15V |
24V |
36V |
48V |
Rated Current |
14A |
6A |
5A |
3.2A |
2.1A |
1.6A |
Current Range |
0~14A |
0~6A |
0~5A |
0~3.2A |
0~2.1A |
0~1.6A |
Rated Power |
70W |
72W |
75W |
76.8W |
75.6W |
76.8W |
Ripple & Noise |
100mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
200mVp-p |
200mVp-p |
Voltage Adj. Range |
4.5 ~ 5.5V |
10.2~ 13.8V |
13.5~18V |
21.6~28.8V |
32.4~39.6V |
43.2~52.8V |
Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load Regulation |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Setup, Rise Time |
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load |
|||||
Hold Up Time |
60ms/230VAC 12ms/115VAC at full load |
|||||
INPUT |
||||||
Voltage Range |
85 ~ 264VAC 120 ~ 373VDC |
|||||
Frequency Range |
47 ~ 63Hz |
|||||
Efficiency |
86.5% |
89% |
89% |
90% |
91.5% |
91.5% |
AC Current |
1.4A/115VAC 0.85A/230VAC |
|||||
Inrush Current |
Cold start 50A/230VAC |
|||||
Leakage Current |
<0.75mA / 240VAC |
|||||
PROTECTION |
||||||
Over Load |
110 ~ 150% rated output power |
|||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||||
Over Voltage |
5.75~6.75V |
13.8 ~ 16.2V |
18.75~21.75V |
28.8 ~ 33.6V |
41.4~48.6V |
55.2~ 64.8V |
Protection type: shut down o/p voltage, re-power on to recover |
||||||
ENVIRONMENT |
||||||
Working Temp. |
-30 ~ +70ºC (Refer to "derating curve") |
|||||
Working Humidity |
20 ~ 90% RH non-condensing |
|||||
Storage Temp., Humidity |
-40 ~ +85ºC, 10 ~ 95% RH |
|||||
Temp. Coefficient |
±0.03%/ºC (0 ~ 50ºC) |
|||||
Vibration |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
|||||
SAFETY & EMC |
||||||
Safety Standards |
UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved |
|||||
Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
|||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH |
|||||
EMC Emission |
Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN 61000-3-2,-3 |
|||||
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A |
|||||
OTHERS |
||||||
Dimension |
99*82*30mm (L*W*H) |
|||||
Weight |
0.3Kg |
|||||
Packing |
45pcs/carton/14.5kg/0.77CUFT |
|||||
NOTE |
||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time |