| SPECIFICATION |
| OUTPUT |
| Model |
NES-100-5 |
NES-100-7.5 |
NES-100-9 |
NES-100-12 |
NES-100-15 |
NES-100-24 |
NES-100-48 |
| DC Voltage |
5V |
7.5V |
9V |
12V |
15V |
24V |
48V |
| Rated Current |
20A |
13.6A |
11.2A |
8.5A |
7A |
4.5A |
2.3A |
| Current Range |
0~20A |
0~13.6A |
0~11.2A |
0~8.5A |
0~7A |
0~4.5A |
0~2.3A |
| Rated Power |
100W |
102W |
100.8W |
102W |
105W |
108W |
110.4W |
| Ripple & Noise |
80mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
| Voltage Adj. Range |
4.75 ~5.5V |
7.13 ~ 8.3V |
8.55 ~ 9.9V |
11.4 ~ 13.2V |
14.25 ~ 16.5V |
22.8 ~ 26.4V |
45.6 ~ 52.8V |
| Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Load Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Setup, Rise Time |
1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load |
| Hold Up Time |
30ms/230VAC 25ms/115VAC at full load |
| INPUT |
| Voltage Range |
85 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC |
| Frequency Range |
47 ~ 63Hz |
| Efficiency |
80% |
81% |
81% |
83% |
84% |
86% |
86% |
| AC Current |
2A/115VAC 1.2A/230VAC |
| Inrush Current |
Cold Start 45A |
| Leakage Current |
<2mA / 240VAC |
| PROTECTION |
| Over Load |
110 ~ 150% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage |
5.75 ~ 6.75V |
8.6 ~ 10.1V |
10.4 ~ 12.2V |
13.8 ~ 16.2V |
17.25 ~ 20.25V |
27.6 ~ 32.4V |
55.2 ~ 64.8V |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| ENVIRONMENT |
| Working Temp. |
-20 ~ +60ºC (Refer to "Derating Curve") |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-40 ~ +85ºC, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/ºC (0 ~ 50ºC) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| SAFETY & EMC |
| Safety Standards |
Design refer to UL60950-1, CB(IEC60950-1),CCC GB4943 |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH |
| EMC Emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
| EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A |
| OTHERS |
| Dimension |
159*97*38mm (L*W*H) |
| Weight |
0.55Kg |
| Packing |
30pcs/carton/17.5kg/0.97CUFT |
| NOTE |
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. |
| 4. Line regulation is measured from low line to high line at rated load. |
| 5. Load regulation is measured from 0% to 100% rated load. |
| 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
){kind=link}