China manufacturer IP20 power supply 200W 24V 8.8A smps transformer
200W Single Output Switching Power Supply NES-200 series
Features:
AC input range selectable by switch
Protections: Short circuit / Overload / Over voltage/ Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High efficiency, long life and high reliability
2 years warranty
Product Parameters
| SPECIFICATION |
| OUTPUT |
| Model |
NES-200-5 |
NES-200-7.5 |
NES-200-12 |
NES-200-15 |
NES-200-24 |
NES-200-36 |
NES-200-48 |
| DC Voltage |
5V |
7.5V |
12V |
15V |
24V |
36V |
48V |
| Rated Current |
40A |
27A |
17A |
14A |
8.8A |
5.9A |
4.4A |
| Current Range |
0~40A |
0~27A |
0~17A |
0~14A |
0~8.8A |
0~5.9A |
0~4.4A |
| Rated Power |
200W |
202.5W |
204W |
210W |
211.2W |
212.4W |
211.2W |
| Ripple & Noise |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
240mVp-p |
240mVp-p |
| Voltage Adj. Range |
4.5 ~5.6V |
6 ~ 9V |
10~ 13.5V |
13.5~18V |
20~26.4V |
32~40V |
41~56V |
| Voltage Tolerance |
±2.0% |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Load Regulation |
±1.0% |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Setup, Rise Time |
1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load |
| Hold Up Time |
20ms/230VAC 16ms/115VAC at full load |
| Voltage Range |
90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC |
| Frequency Range |
47 ~ 63Hz |
| Efficiency |
79% |
82% |
85% |
85% |
87% |
89% |
89% |
| AC Current |
4.5A/115VAC 2.5A/230VAC |
| Inrush Current |
40A/115VAC 55A/230VAC |
| Leakage Current |
<3.5mA / 240VAC |
| Over Load |
105 ~ 135% rated output power |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
5.75~7.0V |
9.4~10.9V |
13.8 ~ 16.2V |
18~21V |
27.6 ~ 32.4V |
41.4~46.8V |
57.6~ 67.2V |
| Protection type: shut down O/P voltage, recovers automatically after temperature goes down |
| Working Temp. |
-20 ~ +50ºC (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-20 ~ +85ºC, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/ºC (0 ~ 50ºC) |
| Vibration |
10 ~ 500Hz, 3G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Safety Standards |
UL60950-1 approved |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH |
| Dimension |
215*115*50mm (L*W*H) |
| Weight |
0.93Kg |
| Packing |
12pcs/carton/12kg/0.92CUFT |
| NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
){kind=link}