Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | 2 Years |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
SPECIFICATIONS | |||||
OUTPUT | |||||
Model | DR-120-12 | DR-120-24 | DR-120-48 | ||
DC Voltage | 12V | 24V | 48V | ||
Rated Current | 10A | 5A | 2.5A | ||
Current Range | 0-10A | 0-5A | 0-2.5A | ||
Rated Power | 120W | 120W | 120W | ||
Ripple & Noise | 80mVp-p | 80mVp-p | 100mVp-p | ||
Voltage Adj. Range | 12-14V | 24-28V | 48-53V | ||
Voltage Tolerance | ±2% | ±1% | ±1% | ||
Line regulation | ±0.5% | ±0.5% | ±0.5% | ||
Load regulation | ±1% | ±1% | ±1% | ||
Setup, Rise Time | 500ms,70ms/230VAC 500ms,70ms/115VAC at full load | ||||
Hold Up Time | 36ms/230VAC 32ms/115VAC at full load | ||||
INPUT | |||||
Voltage Range | 88~132VAC/176~264VAC selected by switch 47~63Hz; 248~370VDC | ||||
AC Current | 2.6A/115VAC 1.6A/230VAC | ||||
Efficiency | 80% | 84% | 85% | ||
Inrush Current | Cold start 20A/115V 40A/230V | ||||
Leakage Current | <3.5mA/240VAC | ||||
PROTECTION | |||||
Over Load | 105%~150% rated output power | ||||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
Over Voltage | 15-16.5V | 29-33V | 58-65V | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||||
Over Temp. | 85ºC±5ºC(TSW1) | 90ºC±5ºC(TSW1) | 90ºC±5ºC(TSW1) | ||
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down | |||||
ENVIRONMENT | |||||
Working Temp., Humidity | -10ºC~+60ºC; 20%~90% RH non-condensing | ||||
Storage Temp., Humidity | -20ºC~+85ºC; 10%~95%RH | ||||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||
SAFETY | |||||
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC/25ºC/70%RH | ||||
STANDARD | |||||
Safety Standard | Design refer to UL508,UL60950-1,TUV EN60950-1 | ||||
EMC Standard | Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2(EN50082-2), heavy industry level, criteria A | ||||
OTHERS | |||||
Dimension | 65.5*125.2*100mm(L*W*H) | ||||
Weight | 0.79Kg | ||||
Packing | 20pcs/carton/16.5kg/1.29CUFT | ||||
NOTE | |||||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |