200W Single Output with PFC Function SP-200 series
Features:
·Universal AC input/ full range
·Built-in active PFC function,PF>0.93
·100% full load burn-in test
·Protections: Short circuit/ Over load/ Over voltage/ Over temperature
·Built-in constant current limiting circuit
·LED indicator for power on
·Fixed switching frequency at PFC: 7KHz PWM:134 KHz
·2 years warranty
| SPECIFICATIONS |
| OUTPUT |
|
| Model |
SP-200-5 |
SP-200-7.5 |
SP-200-12 |
SP-200-13.5 |
SP-200-15 |
SP-200-24 |
SP-200-27 |
SP-200-48 |
| DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Rated Current |
40A |
26.7A |
16.7A |
14.9A |
13.4A |
8.4A |
7.5A |
4.2A |
| Current Range |
0-40A |
0-26.7A |
0-16.7A |
0-14.9A |
0-13.4A |
0-8.4A |
0-7.5A |
0-4.2A |
| Rated Power |
200W |
200.2W |
200.4W |
201.1W |
201W |
201.6W |
202.5W |
201.6W |
| Ripple & Noise |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
150mVp-p |
150mVp-p |
250mVp-p |
| DC Adjustment Range |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
| Voltage Tolerance |
±2% |
±2% |
±2% |
±2% |
±2% |
±1% |
±1% |
±1.0% |
| Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Load Regulation |
±1% |
±1% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Setup, Rise, Hold Up Time |
600ms,40ms,20ms at full load |
| Voltage Range |
85~264 VAC 47-63Hz;120~370VDC |
| AC Current |
3.5A/115 VAC 1.7A/230VAC |
| Power Factor |
PF>0.93/230VAC,PF>0.97/115VAC at full load |
| Efficiency |
71% |
76% |
79% |
80% |
81% |
83% |
83% |
84% |
| Inrush Current |
Cold start 50A/230VAC |
| Leakage Current |
<2mA/240VAC |
| Over Load |
105%-150% rated output power |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
110%~135% |
| Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp. |
80±5ºC (TWS1:detect on heatsink of power transistor) |
| |
Protection type: shutdown o/p voltage, recovers automatically after temperature goes down |
| Remote Control (option) |
CN3:4~10VDC POWER OFF, <0~0.8VDC POWER ON |
| Working Temp. Humidity |
-10ºC~+60ºC; 20%~90% RH non-condensing |
| Storage Temp. Humidity |
-20ºC~+85ºC; 10%~95% RH |
| Temp. Coefficient |
±0.05%/ºC(0~50ºC) |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25ºC/70% RH |
| Safety Standard |
Design refer to UL60950-1,TUV EN60950-1, CCC |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024, light industry level, criteria A |
| Dimension |
199*99*50mm (L*W*H) |
| Weight |
0.85Kg/pc; 20pcs/17.9kg/1.28CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
){kind=link}