Output Type: | Single |
---|---|
Warranty: | 2 Years |
Output Power: | 101 - 200W |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
SPECIFICATION | ||||
OUTPUT | ||||
Model | LDV-150-5 | LDV-150-12 | LDV-150-24 | LDV-150-48 |
DC Voltage | 5V | 12V | 24V | 48V |
Rated Current | 30A | 12A | 6A | 3A |
Current Range | 0-30A | 0-12A | 0-6A | 0-3A |
Rated Power | 150W | 150W | 150W | 150W |
Ripple & Noise | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p |
Voltage Adj. Range | ±10% | ±10% | ±10% | ±10% |
Voltage Tolerance | ±1% | ±1% | ±1% | ±1% |
Inlet Stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load Stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Setup, Rise, Hold Up Time | 800s,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC | |||
Voltage Range | 110VAC 50-60Hz | |||
Efficiency | 76% | 79% | 83% | 83% |
Inrush Current | Cold-start current 30A/115V 60A/230V | |||
Over Load | 105%~150% | |||
plusing hiccup shutdown Reset:auto recovery | ||||
Working Temp., Humidity | -10ºC~+60ºC(Refer to output derating curve),20%~90%RH | |||
Storage Temp., Humidity | -20ºC~+85ºC, 10%~95%RH | |||
Temp. Coefficient | ±0.03%/ºC(0-50ºC) | |||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes | |||
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |||
Safety Standard | UL1012TUV EN60950(IEC950,UL1950) Approved IP67 | |||
EMC Standard | CLSPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
OTHERS | ||||
Dimension | 242*67*44(L*W*H) | |||
Weight | 1.23Kg | |||
NOTE | ||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Suppliers with verified business licenses