Output Type: | Single |
---|---|
Warranty: | 2 Years |
Output Power: | 1 - 50W |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
SPECIFICATION | ||||||||||
OUTPUT | ||||||||||
Model | LPV-35-5 | LPV-35-12 | LPV-35-15 | LPV-35-24 | LPV-35-36 | |||||
DC Voltage | 5V | 12V | 15V | 24V | 36V | |||||
Rated Current | 5A | 3A | 2.4A | 1.5A | 1A | |||||
Current Range | 0 ~ 6A | 0 ~ 3A | 0 ~ 2.4A | 0 ~ 1.5A | 0 ~ 1A | |||||
Rated Power | 30W | 36W | 36W | 36W | 36W | |||||
Ripple&Noise | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p | |||||
Voltage Tolerance | ±6.0% | ±5.0% | ||||||||
Line Regulation | ±1.0% | |||||||||
Load Regulation | ±4.0% | ±2.0% | ||||||||
Setup,Rise Time | 500ms, 20ms/230VAC500ms, 20ms/115VAC at full load | |||||||||
Hold Up Time | 50ms/230VAC 16ms/115VAC at full load | |||||||||
Voltage Range | 90 ~ 264VAC 127 ~ 370VDC | |||||||||
Frequency Range | 47 ~ 63Hz | |||||||||
Efficiency | 77% | 84% | 84% | 85% | 85% | |||||
AC Current | 1.1A/115VAC 0.57A/230VAC | |||||||||
Inrush Current | Cold Start55A at 230VAC | |||||||||
Leakage Current | 0.25mA / 240VAC | |||||||||
Over Load | 110 ~ 150% rated output power | |||||||||
Protectiontype: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||
Over Voltage | 5.75~6.75V | 13.8~16.2V | 17.25~20.25V | 27.6~32.4V | 41.4~48.6V | |||||
Protection type: Shut down o/p voltage, re-power on to recover | ||||||||||
Working Temp. | -30 ~ +65ºC (Refer to "Derating Curve") | |||||||||
Working Humidity | 20 ~ 90% RH non-condensing | |||||||||
StorageTemp., Humidity | -40 ~ +80ºC, 10 ~ 95% RH | |||||||||
Temp. Coefficient | ±0.03%/ºC (0 ~ 45ºC) | |||||||||
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||||||
Safety Standards | UL1310 class 2,CAN/CSA No.223-M91,CB IEC61347-2-13, IP67 approved, design refer to TUV EN60950-1 | |||||||||
Withstand Voltage | I/P-O/P:3KVAC | |||||||||
Isolation Resistance | I/P-O/P>100M Ohms / 500VDC / 25ºC / 70% RH | |||||||||
EMC Emission | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A,EN61000-3-3 | |||||||||
EMC Immunity | Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, light industry level, criteria A | |||||||||
Dimension | 148*40*30mm (L*W*H) | |||||||||
Weight | 0.34Kg | |||||||||
Packing | 40pcs/14.6Kg/0.63CUFT | |||||||||
NOTE | ||||||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4.Derating may not be needed under low input voltage. Please check the static characteristics for more details. |
Suppliers with verified business licenses