25W Single Output DC-DC Converter SD-25 series
Features :
2:1 wide input range
Protections: Short circuit / Overload / Over voltage
1500VAC I/O isolation
Built-in EMI filter, low ripple noise
100% full load burn-in test
Fixed switching frequency at 83KHz
Low cost High reliability
2 years warranty
| SPECIFICATION |
| OUTPUT |
|
| Model |
SD-25A-5 |
SD-25B-5 |
SD-25C-5 |
SD-25A-12 |
SD-25B-12 |
SD-25C-12 |
SD-25A-24 |
SD-25B-24 |
SD-25C-24 |
| DC Voltage |
5V |
12V |
24V |
| Rated Current |
5A |
2.1A |
1.1A |
| Current Range |
0 ~ 5A |
0 ~ 2.1A |
0 ~ 1.1A |
| Rated Power |
25W |
25.2W |
26.4W |
| Ripple & Noise |
100mVp-p |
120mVp-p |
150mVp-p |
| Voltage Adj. Range |
4.75~5.5VDC |
11-16VDC |
23-30VDC |
| Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
| Line Regulation |
±0.5% |
±0.3% |
±0.2% |
| Load Regulation |
±0.5% |
±0.3% |
±0.2% |
| Setup, Rise, Hold Up Time |
2.5s, 50ms, ------ at full load |
| Voltage Range |
A: 9.2 ~18VDC B:19 ~ 36VDC C:36~72VDC |
| Efficiency |
71% |
72% |
74% |
72% |
75% |
78% |
75% |
78% |
81% |
| DC Current |
A:3.2A/12V |
B:1.6A/24V |
C:0.8A/48V |
Over Load
|
105 ~ 150% rated output power |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage |
5.75 ~ 6.75V/10% load |
16.8 ~ 20V/10% load |
31.5 ~ 37.5V/10% load |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
| Working Temp. |
-10 ~ +60ºC (Refer to "Derating Curve") |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-20 ~ +85ºC, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/ºC (0 ~ 50ºC) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Safety Standards |
Design refer to LVD |
| Withstand Voltage |
I/P-O/P: 1.5KVAC I/P-FG:2.0KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH |
| EMC Emission |
Compliance to EN55022 (CISPR22) Class B |
| EMC Immunity |
Compliance to EN61000-4-2, 3, 4, 6, 8, EN55024, heavy industry level, criteria A |
| Dimension |
99*97*36mm (L*W*H) |
| Weight |
0.38kg |
| Packing |
45pcs/17.8kg/0.9CUFT |
| NOTE |
|
1. All parameters NOT specially mentioned are measured at 12,24,48VDC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Contact us for more details.
){kind=link}
){kind=link}