Leyu Isolated Converter 155W Dual Output UPS Function Power Supply

Product Description

Product Description

Product Parameters

 

SPECIFICATION
OUTPUT
MODEL	ADD-155A			ADD-155B			ADD-155C
Output number	CH1	CH2	CH3	CH1	CH2	CH3	CH1	CH2	CH3
DC voltage	13.8V	5V	13.3V	27.6V	5V	27.1V	54 V	5 V	53.5 V
Rated Current	9.5A	3A	0.5A	4.5A	3A	0.5A	2.3A	3A	0.2A
Current Range	0~10.5A	0~3A	--------	0~5A	0~3A	---------	0~2.5A	0~3A	---------
Rated Power	152.75W			152.75W			149.9W
Ripple & Noise	150mVp-p	100mVp-p	--------	200mVp-p	100mVp-p	-------	240mVp-p	100mVp-p	---------
Voltage Adj. Range	CH1:12~14.5V			CH1:24~29V			CH1:48~58V
Voltage Tolerance	±2.0%	±3.0%	--------	±1.0%	±3.0%	--------	±1.0%	±5.0%	---------
Line Regulation	±1.0%	±0.5%	--------	±1.0%	±0.5%	--------	±1.0%	±0.5%	---------
Load Regulation	±1.0%	±2.0%	--------	±1.0%	±2.0%	--------	±1.0%	±2.0%	---------
Setup, Rise Time	1000ms, 90ms/230VAC          2000ms, 90ms/115VAC at full load
Hold Up Time	24ms/230VAC          20ms/115VAC at full load
INPUT
Voltage Range	88~264VAC   47~63Hz; 124~370VDC
AC Current	2.5A/115VAC   1.5A/230VAC
Efficiency	78%			81%			81%
Inrush Current	Cold start 20A/115VAC   40A/230VAC
Leakage Current	<1mA /240VAC
PROTECTION
Over Load	CH1,CH2:105 ~ 135%          CH3:0.51 ~ 0.9A rated output power
	Protection type: AC Charging Mode: Hiccup mode, recovers automatically after fault condition is removed UPS Mode: Protected by internal fuse
Over Voltage	CH1:15.87~18.63V			CH1:31.74~37.26V			CH1:62.1~72.9V
	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Battery Low	10V±0.8V			19.5V±1.5V			39V±2V
ENVIRONMENT
Working Temp.	-10~+60ºC (Refer to "Derating Curve")
Working Humidity	20~90%RH non-condensing
Storage Temp., Humidity	-20~+85ºC,10~95%RH
Temp. Coefficient	±0.03%/ ºC(0~50ºC )on CH1 output
Vibration	10~500Hz,2G10min./1cycle,60min.each along X, Y,Z axes
SAFETY &EMC
Safety Standards	Design refer to UL60950-1, TUV EN60950-1
Withstand Voltage	I/P-O/P:3KVAC   I/P-FG:1.5KVAC   O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25ºC /70%RH
EMC Emission	Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A
OTHERS
Dimension	199*110*50mm(L*W*H)
Weight	1Kg
Packing	16pcs/16Kg/0.95CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.