Hot Selling 60W 12V 24V DC DIN Rail Power Supply

• Output Type: Single
• Warranty: 2 Years
• Output Power: 1 - 50W
• Input Voltage: 110-220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Model NO.: MDR-60-24
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: Two-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, ISO, CCC
• Brand: Leyu
• Trademark: LEYU
• Origin: Zhejiang
• HS Code: 8504401990
• Production Capacity: 6000PCS/Month

Product Description

Features: 
High efficiency, high reliability, low cost
AC input range selected by switch
100% full load burn-in test
Protections: Short circuit / Over load
Fixed switching frequency at 25KHz
Cooling by free air convection
2 years warranty

SPECIFICATIONS
OUTPUT
Model	MDR-60-5	MDR-60-12	MDR-60-24	MDR-60-48
DC Voltage	5V	12V	24V	48V
Rated Current	10A	5A	2.5A	1.25A
Current Range	0-10A	0-5A	0-2.5A	0-1.25A
Rated Power	50W	60W	60W	60W
Ripple & Noise	80mVp-p	120mVp-p	150mVp-p	200mVp-p
Voltage Tolerance	±2%	±1%	±1%	±1%
Line regulation	±1.0%	±1.0%	±1.0%	±1.0%
Load regulation	±1.0%	±1.0%	±1.0%	±1.0%
Setup, Rise Time	500ms,30ms/230VAC   200ms,30ms/115VAC at full load
Hold Up Time	50ms/230VAC   20ms/115VAC at full load
Voltage Range	85~264VAC   47~63Hz; 120~370VDC
AC Current	1.8A/115VAC   1A/ 230VAC
Efficiency	78%	86%	88%	87%
Inrush Current	Cold start 30A/115VAC   60A/230VAC
Leakage Current	<1mA/240VAC
Over Load	105%~150% rated output power
	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	6.25-7.25V	15.6-18V	31.2-36V	57.6-64.8V
	Protection type: Shut down o/p voltage, re-power on to recover
Working Temp., Humidity	-20ºC~+70ºC; 20%~90% RH non-condensing
Storage Temp., Humidity	-40ºC~+85ºC; 10%~95%RH
Temp. Coefficient	±0.03%/ºC(0~50ºC)
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
Withstand Voltage	I/P-O/P: 3KVAC   I/P-FG:2KVAC   O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-F/G: >100M Ohms / 500VDC/25ºC/70% RH
Safety Standard	Design refer to UL508, UL60950-1,TUV EN60950-1,EN50178
EMC Standard	Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2,EN61204-3, heavy industry level, criteria A
Dimension	40*90*100mm(W*H*D)
Weight	0.33Kg
Packing	42pcs/carton/14.8kg/0.82CUFT
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.