Dr-100-24 100W 12V 24V DC DIN Rail Power Supply for Electrical Equipment

• Output Type: Single
• Warranty: 2 Years
• Output Power: 51 - 100W
• Input Voltage: 110-220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Model NO.: DR-100-24
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: Two-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, ISO, CCC
• Brand: Leyu
• Transport Package: Paper Carton
• Specification: 100*93*56(mm)
• Trademark: LEYU
• Origin: Zhejiang
• HS Code: 8504401990
• Production Capacity: 50000pieces/Month

Product Description

SPECIFICATIONS
OUTPUT
Model	DR-100-12	DR-100-15	DR-100-24
DC Voltage	12V	15V	24V
Rated Current	7.5A	6.5A	4.2A
Current Range	0-7.5A	0-6.5A	0-4.2A
Rated Power	90W	97.5W	100.8W
Ripple & Noise	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	12-15V	15-18V	24-29V
Voltage Tolerance	±2%	±1%	±1%
Line regulation	±1%	±1%	±1%
Load regulation	±1%	±1%	±1%
Setup, Rise Time	2700ms,80ms/230VAC   2700ms,80ms/115VAC at full load
Hold Up Time	50ms/230VAC   18ms/115VAC at full load
Voltage Range	85~264VAC   47~63 Hz; 124~370VDC
AC Current	1.6A/115V   0.96A/230V
Efficiency	87%	87%	89%
Inrush Current	Cold start 30A/115VAC   45A/230VAC
Leakage Current	<1mA/240VAC
Over Load	105%~135% rated output power
	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	16-20V	19-23V	30-35V
	Protection type: Shut down o/p voltage, re-power on to recover
Over Temp.	Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
Working Temp., Humidity	-20ºC~+60ºC; 20%~90% RH non-condensing
Storage Temp., Humidity	-40ºC~+85ºC; 10%~95%RH
Vibration	10~500Hz, 2G 10min./1cycle, 60min, each along X, Y, Z axes
Withstand Voltage	I/P-O/P: 3KVAC
Isolation Resistance	I/P-O/P>100M Ohms / 500VDC/25ºC/70%RH
Safety Standard	Design refer to UL60950-1,TUV EN60950-1, EN50178
EMC Standard	EN61240-3,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2, EN61204-3,heavy industry level, criteria A
Dimension	100*93*56mm(L*W*H)
Weight	0.35Kg
Packing	36pcs/13.6Kg/0.89CUFT
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.