Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | 2 Years |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
NES-350-15 LED Power Supply 350W Single Output Constant Voltage 15V
350W Single Output Switching Power Supply NES-350 series
Features:SPECIFICATION | |||||||
OUTPUT | |||||||
Model | NES-350-5 | NES-350-7.5 | NES-350-12 | NES-350-15 | NES-350-24 | NES-350-36 | NES-350-48 |
DC Voltage | 5V | 7.5V | 12V | 15V | 24V | 36V | 48V |
Rated Current | 60A | 46A | 29A | 23.2A | 14.6A | 9.7A | 7.3A |
Current Range | 0~60A | 0~46A | 0~29A | 0~23.2A | 0~15.6A | 0~9.7A | 0~7.3A |
Rated Power | 300W | 345W | 348W | 348W | 350.4W | 349.2W | 350.4W |
Ripple & Noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 240mVp-p | 240mVp-p |
Voltage Adj. Range | 4.5 ~5.6V | 6 ~ 9V | 10~ 13.5V | 13.5~18V | 20~26.4V | 32~40V | 41~56V |
Voltage Tolerance | ±3.0% | ±2.0% | ±1.5% | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load Regulation | ±2.0% | ±2.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Setup, Rise Time | 1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load | ||||||
Hold Up Time | 20ms/230VAC 16ms/115VAC at full load | ||||||
Voltage Range | 90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC | ||||||
Frequency Range | 47 ~ 63Hz | ||||||
Efficiency | 78% | 80% | 83% | 84% | 87% | 87.50% | 87.50% |
AC Current | 7A/115VAC 4A/230VAC | ||||||
Inrush Current | 40A/115VAC 60A/230VAC | ||||||
Leakage Current | <3.5mA / 240VAC | ||||||
Over Load | 105 ~ 135% rated output power | ||||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||
Over Voltage | 5.75~7.5V | 9.4~11.25V | 13.8 ~ 16.2V | 18~21V | 27.6 ~ 32.4V | 41.4~46.8V | 57.6~ 67.2V |
Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||
Working Temp. | -20 ~ +60ºC (Refer to output load derating curve) | ||||||
Working Humidity | 20 ~ 90% RH non-condensing | ||||||
Storage Temp., Humidity | -20 ~ +85ºC, 10 ~ 95% RH | ||||||
Temp. Coefficient | ±0.03%/ºC (0 ~ 50ºC) | ||||||
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||||
Safety Standards | UL60950-1, CB(IEC60950-1),CCC GB4943 approved | ||||||
Withstand Voltage | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH | ||||||
EMI Conduction & Radiation | Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B | ||||||
Harmonic Current | Compliance to EN61000-3-2,-3,GB17625.1 | ||||||
EMC Immunity | Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, heavy industry level, criteria A | ||||||
Dimension | 215*115*50mm (L*W*H) | ||||||
Weight | 1.07Kg | ||||||
Packing | 12pcs/carton/13.5kg/0.92CUFT | ||||||
NOTE | |||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. |