LEYU whole economical model DR-15 5V din rail switching power supply 15w smps
15W Single Output Industrial DIN Rail Power Supply DR-15 series
Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class 2
LED indicator for power on
100% full load burn-in test
2 year warranty
| SPECIFICATIONS |
| OUTPUT |
|
| Model |
DR-15-5 |
DR15-12 |
DR-15-15 |
DR-15-24 |
| DC Voltage |
5V |
12V |
15V |
24V |
| Rated Current |
2.4A |
1.25A |
1A |
0.63A |
| Current Range |
0-2.4A |
0-1.25A |
0-1A |
0-0.63A |
| Rated Power |
12W |
15W |
15W |
15.2W |
| Ripple & Noise |
80mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
| Voltage Adj. Range |
-5%,+10% |
±10% |
±10% |
±10% |
| Voltage Tolerance |
±2% |
±1% |
±1% |
±1% |
| Setup, Rise, Hold Up Time |
1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load70ms/230VAC 16ms/115VAC at full load |
| INPUT |
|
| Voltage Range |
85 ~ 264VAC 120 ~ 370VDC |
| AC Current |
0.88A/115VAC 0.48A/230VAC |
| Efficiency |
74% |
84% |
83.50% |
85% |
| Inrush Current |
COLD START 35A/115VAC 65A/230VAC |
| PROTECTION |
|
| Over Load |
105%~160% |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%~135% |
| Protection type: Shut down o/p voltage, re-power on to recover |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10ºC~+60ºC; 20%~90%RH |
| Storage Temp., Humidity |
-40ºC~+85ºC; 10%~95%RH |
| Temp. Coefficient |
±0.03%/ºC(0~50ºC) |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVAC |
| Isolation Resistance |
I/P-O/P: 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL60950-1,TUV EN60950-1,EN50178 |
| EMC Standard |
Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3 |
| OTHERS |
|
| Dimension |
25*93*56mm(L*W*H) |
| Weight |
0.15Kg |
| Packing |
140pcs/carton |
| |
|
| NOTE |
|
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. |
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. |
| 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Product Parameters
){kind=link}
){kind=link}