3000W 48V 62.5A DC Single Output Switching Power Supply

• Output Type: Single
• Warranty: 2 Years
• Output Power: 3000W
• Input Voltage: AC220V±20%
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Model NO.: SV-3000-48
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: Two-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, ISO, CCC
• Brand: Leyu
• Weight: 9.5kg
• Efficiency: 86%
• Transport Package: Carton
• Specification: 220*400*150mm(L*W*H)
• Trademark: LEYU
• Origin: China Mainland
• HS Code: 8504401990
• Production Capacity: 3000/M

Product Description

3000W Single Output switching power supply    SV-3000 series
Features: 
·High efficiency, high reliability
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
1 year warranty

SPECIFICATIONS
OUTPUT
Model	SV-3000-24	SV-3000-48	SV-3000-110
DC Voltage	24V	48V	110V
Rated Current	120A	60.0A	27.3A
Current Range	0-120A	0-60.0A	0-27.3A
Ripple & Noise	0.50%	0.50%	0.50%
Voltage Adj. Range	0-24V	0-48V	0-110V
Setup&Rise Time	100ms,50ms at full load
Hold Up Time	20ms at full load
INPUT
Voltage Range	AC220V±20%     47~63HZ
AC Current	3.2A/115V     1.6A/230V
Efficiency	86%	87%	89%
Inrush Current	40A/230V
Leakage Current	<0.5MA/230VAC
PROTECTION
Over Load	110~150%
	Protection type: Shut down o/p voltage, re-power on to recover
Over Voltage	110~150%
	Protection type: Shut down o/p voltage, re-power on to recover
SAFETY
Withstand Voltage	I/P-O/P:1.5KVAC/1min           I/P-F/G:1.5KVAC/1min
Isolation Resistance	O/P-F/G:0.5KVAC /1min
Weight	9.5kg/piece
Dimension	400*220*150mm
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.