Single Type Multifunction PSU Output High Switching Power Supply DC 12V 1000W

• Output Type: Single
• Warranty: 2 Years
• Output Power: 1000W
• Input Voltage: AC220V±20%
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Model NO.: SV-1000-12
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: Two-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, ISO, CCC
• Brand: Leyu
• Weight: 3.5kg
• Efficiency: 86%
• Transport Package: Carton
• Specification: 220*255*75mm(L*W*H)
• Trademark: LEYU
• Origin: China Mainland
• HS Code: 8504401990
• Production Capacity: 3000/M

Product Description

1000W Single Output switching power supply    SV-1000 series
Features: 
·High efficiency, high reliability
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
1 year warranty
Dimensions:260*145*115(mm)

SPECIFICATIONS
OUTPUT
Model	SV-1000-12		SV-1000-15		SV-1000-24		SV-1000-30		SV-1000-48		SV-1000-110
DC Voltage	12V		15V		24V		30V		48V		110V
Rated Current	83.3A		66.6A		41.6A		33.3A		20.8A		9.0A
Current Range	0-83.3A		0-66.6A		0-41.6A		0-33.3A		0-20.8A		0-9.0A
Ripple & Noise	160mV		180mV		190mV		320mV		400mV		900mV
Voltage Adj. Range	0.50%		0.50%		0.50%		0.50%		0.50%		0.50%
Setup&Rise Time	100ms,50msat full load
Hold Up Time	20ms at full load
INPUT
Voltage Range	AC220V±20%   47~63HZ
AC Current	3.2A/115V1.6A/230V
Efficiency	86%	86%		87%		87%		89%		89%
Inrush Current	40A/230V
Leakage Current	<0.5MA/230VAC
PROTECTION
Over Load	110~150%
	Protection type: Shut down o/p voltage, re-power on to recover
Over Voltage	110~150%
	Protection type: Shut down o/p voltage, re-power on to recover
SAFETY
Withstand Voltage	I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min
Isolation Resistance	O/P-F/G:0.5KVAC /1min
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1μ &47μparallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets EMC directives.