| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 14.77/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AD-55A 55W 13.8V 13.4V High Effiicecy with Single output with battery charge powe rsupply
| SPECIFICATION | ||||
| MODEL | AD-55A | AD-55B | ||
| OUTPUT | ||||
| Output number | CH1 | CH2 | CH1 | CH2 |
| DC voltage | 13.8V | 13.4V | 27.6V(24V) | 26.5V(24V) |
| Rated Current | 3.5A | 0.23A | 1.8A | 0.16A |
| Current Range | 0~4A | -------- | 0~2A | -------- |
| Rated Power | 51.38W | 53.92W | ||
| Ripple & Noise | 100mVp-p | -------- | 100mVp-p | -------- |
| Voltage Adj. Range | CH1:12~14.5V | CH1:24~29V | ||
| Voltage Tolerance | ±1.0% | -------- | ±1.0% | -------- |
| Line Regulation | ±0.5% | -------- | ±0.5% | -------- |
| Load Regulation | ±0.5% | -------- | ±0.5% | -------- |
| Setup, Rise Time | 800ms,50ms/230VAC 1600ms,50ms/115VAC at full load | |||
| Hold Up Time | 80ms/230VAC 16ms/115VAC at full load | |||
| INPUT | ||||
| Voltage Range | 88~264VAC 47~63Hz; 124~370VDC | |||
| AC Current | 1.6A/115VAC 1A/230VAC | |||
| Efficiency | 71% | 74% | ||
| Inrush Current | Cold start 20A/115VAC 40A/230VAC | |||
| Leakage Current | <1mA /240VAC | |||
| PROTECTION | ||||
| Over Load | 105~150% rated output power | |||
| Protection type: AC Charging Mode: Hiccup mode, recovers automatically after fault condition is removed UPS Mode: Protected by internal fuse | ||||
| Over Voltage | CH1:15.87~18.63V | CH1:31.74~37.26V | ||
| Protection type: Hiccup mode,recovers automatically after fault condition is removed | ||||
| Battery Low | 9.5~11V | 20~22V | ||
| ENVIRONMENT | ||||
| Working Temp. | -10~+60ºC (Refer to "Derating Curve") | |||
| Working Humidity | 20~90%RH non-condensing | |||
| Storage Temp., Humidity | -20~+85ºC,10~95%RH | |||
| Temp. Coefficient | ±0.03%/ ºC(0~50ºC )on CH1 output | |||
| Vibration | 10~500Hz,2G10min./1cycle,60min.each along X, Y,Z axes | |||
| SAFETY &EMC | ||||
| Safety Standards | UL60950-1, TUV EN60950-1 approved | |||
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|||
| Isolation Resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25ºC /70%RH |
|||
| EMC Emission | Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3 |
|||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A |
|||
| OTHERS | ||||
| Dimension | 159*97*38mm(L*W*H) | |||
| Weight | 0.5Kg | |||
| Packing | 24pcs/12.60Kg/0.75CUFT | |||
| NOTE | ||||
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
||||
){kind=link}