320W Single Output with PFC Function SP-320 series
Features:
·Universal AC input/ full range
·Built-in active PFC function,PF>0.95
·Protections: Short circuit/ Over load/ Over voltage/ Over temperature
·Forced air cooling by built-in DC fan
·Fixed switching frequency at 100KHz
·2 years warranty
| SPECIFICATIONS |
| OUTPUT |
|
| Model |
SP-320-5 |
SP-320-7.5 |
SP-320-12 |
SP-320-13.5 |
SP-320-15 |
SP-320-24 |
SP-320-27 |
SP-320-48 |
| DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Rated Current |
55A |
40A |
25A |
22A |
20A |
13A |
11.7A |
6.7A |
| Current Range |
0-55A |
0-40A |
0-25A |
0-22A |
0-20A |
0-13A |
0-11.7A |
0-6.7A |
| Rated Power |
275W |
300W |
300W |
297W |
300W |
312W |
315.9W |
321.6W |
| Ripple & Noise |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
240mVp-p |
| DC Adjustment Range |
±10% |
±20% |
-16%,+10% |
±11% |
-10%,+20% |
-16%,+10% |
-4%,+18% |
-15%,+17% |
| Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
±1.0% |
| Line Regulation |
±0.5% |
±0.5% |
±0.3% |
±0.3% |
±0.3% |
±0.2% |
±0.2% |
±0.2% |
| Load Regulation |
±1% |
±1% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Setup, Rise, Hold Up Time |
800ms,50ms,16ms/230VAC 2500ms,50ms,16ms/115VAC at full load |
| INPUT |
|
| Voltage Range |
88~264VAC 120~370VDC frequency: 47~63 Hz |
| AC Current |
5A/115 VAC 2.5A/230VAC |
| Power Factor |
PF>0.95/230VAC,PF>0.98/115VAC at full load |
| Efficiency |
79% |
83% |
86% |
86% |
86% |
87% |
88% |
89% |
| Inrush Current |
20A/115VAC 40A/230VAC |
| Leakage Current |
<1mA/240VAC |
| PROTECTION |
|
| Over Load |
105%-135% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage(V) |
115%~135% |
| Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp. |
Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT |
|
| Working Temp. Humidity |
-20ºC~+65ºC; 20%~90 % RH non-condensing |
| Storage Temp. Humidity |
-40ºC~+85ºC; 10%~95 % RH |
| Temp. Coefficient |
±0.03%/ºC(0~50ºC) |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25ºC/70% RH |
| STANDARD |
|
| Safety Standard |
Design refer to UL60950-1,TUV EN60950, CCC |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024, light industry level, criteria A |
| OTHERS |
|
| Dimension |
215*115*50mm (L*W*H) |
| Weight |
1.1Kg/pc; 12pcs/14kg/0.95CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |







