Industrial DIN Rail AC-DC Power Supply 12V 24V 48V 15W Dr-15

Product Description

 High quality CE EMC approved ac to dc din rail power supply, 5v 12v 24v 48v 15w din rail power supply 

15W Single Output Industrial DIN Rail Power Supply    DR-15 series
Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection 
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class 2
LED indicator for power on
100% full load burn-in test
2 year warranty

Product Parameters

SPECIFICATIONS
OUTPUT
Model	DR-15-5	DR15-12	DR-15-15	DR-15-24
DC Voltage	5V	12V	15V	24V
Rated Current	2.4A	1.25A	1A	0.63A
Current Range	0-2.4A	0-1.25A	0-1A	0-0.63A
Rated Power	12W	15W	15W	15.2W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	-5%,+10%	±10%	±10%	±10%
Voltage Tolerance	±2%	±1%	±1%	±1%
Setup, Rise, Hold Up Time	1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load70ms/230VAC16ms/115VAC at full load
INPUT
Voltage Range	85 ~ 264VAC          120 ~ 370VDC
AC Current	0.88A/115VAC          0.48A/230VAC
Efficiency	77%	84%	83.50%	85%
Inrush Current	COLD START 35A/115VAC          65A/230VAC
PROTECTION
Over Load	105%~160%
	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	115%~135%
	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp., Humidity	-10ºC~+60ºC; 20%~90%RH
Storage Temp., Humidity	-40ºC~+85ºC; 10%~95%RH
Temp. Coefficient	±0.03%/ºC(0~50ºC)
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage	I/P-O/P: 3KVAC
Isolation Resistance	I/P-O/P: 100M Ohms / 500VDC
STANDARD
Safety Standard	Design refer to UL60950-1,TUV EN60950-1,EN50178
EMC Standard	Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3
OTHERS
Dimension	25*93*56mm(L*W*H)
Weight	0.15Kg
Packing	140pcs/carton
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.                    2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Product Description

FAQ