| SPECIFICATION |
| OUTPUT |
|
| Model |
SD-100A-5 |
SD-100C-5 |
SD-100D-5 |
SD-100B-12 |
SD-100C-12 |
SD-100D-12 |
SD-100B-24 |
SD-100C-24 |
SD-100D-24 |
SD-100B-48 |
SD-100C-48 |
SD-100D-48 |
| DC Voltage |
5V |
12V |
24V |
48V |
| Rated Current |
20A |
8.5A |
4.2A |
2.1A |
| Current Range |
0~20A |
0~8.5A |
0~4.2A |
0-2.1A |
| Rated Power |
100W |
102W |
100.8W |
100.8W |
| Ripple & Noise |
100mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
| Voltage Adj. Range |
4.5~5.5VDC |
11~16VDC |
23~30VDC |
43.2-52.8VDC |
| Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
| Line Regulation |
±0.5% |
±0.3% |
±0.2% |
±0.2% |
| Load Regulation |
±0.5% |
±0.3% |
±0.2% |
±0.2% |
| Setup, Rise Time |
2s,50ms(only D mode) at full load |
| Hold Up Time |
20ms(only D mode) at full load |
| Voltage Range |
A:9.2~18VDC B:19~36VDC C:36~72VDC D:72~144VDC or 85~132VAC |
| Efficiency |
74% |
75% |
76% |
75% |
77% |
80% |
78% |
81% |
83% |
78% |
81% |
83% |
| DC Current |
4.8A/24V |
2.4A/48V |
1.8A/96V |
4.8A/24V |
2.4A/48V |
1.8A/96V |
4.8A/24V |
2.4A/48V |
1.8A/96V |
4.8A/24V |
2.4A/48V |
1.8A/96V |
| Inrush Current |
D:18A/96VDC |
| Leakage Current |
<0.75mA/120VAC(SD-100D) |
| Over Load |
105~135% rated output power |
| Protection type: Hiccup mode,recovers automatically after fault condition is removed |
| Over Voltage |
5.75~6.75V/10%load |
16.8~20V/10%load |
31.5~37.5V/10%load |
60.2-79.2/10%load |
| Protection type:Hiccup mode,recovers automatically after fault condition is removed |
| Working Temp. |
-10~+60ºC (Refer to "Derating Curve") |
| Working Humidity |
20~90%RH non-condensing |
| Storage Temp.,Humidity |
-20~+85ºC,10~95%RH |
| Temp.Coefficient |
±0.03%/ºC (0~50ºC) |
| Vibration |
10~500Hz,2G 10min./1cycle,60min.each along X, Y, Z axes |
| Safety Standards |
IEC60950-1CB approved by TUV(for D type only) |
| Withstand Voltage |
I/P-O/P:1.5KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25ºC /70%RH |
| EMC Emission |
Compliance to EN55022(CISPR22) Class B |
| EMC Immunity |
Compliance to EN61000-4-2,3,4,6,8,light industry level,criteria A |
| Dimension |
199*98*38mm(L*W*H) |
| Weight |
0.55Kg |
| Packing |
30pcs/16.5Kg |
| NOTE |
|
| 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25ºC of ambient temperature. |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
| 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
){kind=link}