150W Single Output DC-DC Converter SD-150 series
Features:
2:1 wide input range
Protections: Short circuit / Overload / Over voltage
1500VAC I/O isolation
Built-in EMI filter, low ripple noise
100% full load burn-in test
24V and 48V input voltage design refer to LVD
Low cost , High reliability
2 years warranty
Product Description
| SPECIFICATION |
| OUTPUT |
|
| Model |
SD-150A-5 |
SD-150B-5 |
SD-150C-5 |
SD-150B-12 |
SD-150C-12 |
SD-150D-12 |
SD-150B-24 |
SD-150C-24 |
SD-150D-24 |
| DC Voltage |
5V |
12V |
24V |
| Rated Current |
30A |
12.5A |
6.3A |
| Current Range |
0-30A |
0 ~ 12.5A |
0 ~ 6.3A |
| Rated Power |
150W |
150W |
151.2W |
| Ripple & Noise |
120mVp-p |
120mVp-p |
150mVp-p |
| Voltage Adj. Range |
4.5~5.5VDC |
11 ~ 16VDC |
23 ~ 30VDC |
| Voltage Tolerance |
±1.0% |
±1.0% |
±1.0% |
| Line Regulation |
±0.5% |
±0.5% |
±0.3% |
| Load Regulation |
±0.5% |
±0.5% |
±0.3% |
| Setup, Rise Time |
2s, 50ms at full load |
| Hold Up Time |
24ms(only D mode) at full load |
| |
|
| INPUT |
|
| Voltage Range |
A:9.2~18VDC B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC or 85 ~ 132VAC |
| Efficiency |
70% |
73% |
76% |
75% |
77% |
79% |
77% |
80% |
82% |
| Inrush Current |
D: 22.5A/96VDC |
| Leakage Current |
<0.75mA / 120VAC (SD-150D) |
| |
|
| PROTECTION |
|
Over Load
|
105 ~ 135% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage |
16.8V ~ 20V/10% LOAD |
31.5 ~ 37.5V/10% LOAD |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| |
|
| ENVIRONMENT |
|
| Working Temp. |
-10 ~ +60ºC (Refer to "Derating Curve") |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-20 ~ +85ºC, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/ºC (0 ~ 50ºC) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| |
|
| SAFETY & EMC |
|
| Safety Standards |
IEC60950-1 CB approved by TUV (for D type only) |
| Withstand Voltage |
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH |
| EMC Emission |
Compliance to EN55022 (CISPR22) Class B |
| EMC Immunity |
Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A |
| |
|
| OTHERS |
|
| Dimension |
199*110*50mm (L*W*H) |
| Weight |
0.86Kg |
| Packing |
16pcs/14.5Kg/0.95CUFT |
| |
|
| NOTE |
|
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
){kind=link}