| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 26.93/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SPECIFICATION | ||||
| OUTPUT | ||||
| Model | LDV-150-5 | LDV-150-12 | LDV-150-24 | LDV-150-48 |
| DC Voltage | 5V | 12V | 24V | 48V |
| Rated Current | 30A | 12A | 6A | 3A |
| Current Range | 0-30A | 0-12A | 0-6A | 0-3A |
| Rated Power | 150W | 150W | 150W | 150W |
| Ripple & Noise | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p |
| Voltage Adj. Range | ±10% | ±10% | ±10% | ±10% |
| Voltage Tolerance | ±1% | ±1% | ±1% | ±1% |
| Inlet Stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load Stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Setup, Rise, Hold Up Time | 800s,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC | |||
| Voltage Range | 110VAC 50-60Hz | |||
| Efficiency | 76% | 79% | 83% | 83% |
| Inrush Current | Cold-start current 30A/115V 60A/230V | |||
| Over Load | 105%~150% | |||
| plusing hiccup shutdown Reset:auto recovery | ||||
| Working Temp., Humidity | -10ºC~+60ºC(Refer to output derating curve),20%~90%RH | |||
| Storage Temp., Humidity | -20ºC~+85ºC, 10%~95%RH | |||
| Temp. Coefficient | ±0.03%/ºC(0-50ºC) | |||
| Vibration | 10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes | |||
| Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |||
| Safety Standard | UL1012TUV EN60950(IEC950,UL1950) Approved IP67 | |||
| EMC Standard | CLSPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
| OTHERS | ||||
| Dimension | 242*67*44(L*W*H) | |||
| Weight | 1.23Kg | |||
| NOTE | ||||
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
||||
){kind=link}