SPECIFICATIONS |
OUTPUT |
|
MODEL |
SCN-800-12 |
SCN-800-15 |
SCN-800-24 |
SCN-800-48 |
DC Voltage |
12V |
15V |
24V |
48V |
Rated Current |
66A |
54A |
33A |
16.6A |
Current Range |
0-66A |
0-54A |
0-33A |
0-16.6A |
Rated Power |
800W |
800W |
800W |
800W |
Ripple & Noise |
150mVp-p |
150mVp-p |
240mVp-p |
480mVp-p |
Voltage Adj. Range |
±5%; Can adjust from 40%~100% output voltage by external control 2-5V |
Voltage Tolerance |
±1% |
±1% |
±1% |
±1% |
Setup, Rise, Hold Up Time |
800ms, 50ms, 16ms at full load |
|
|
INPUT |
|
Voltage Range |
90~130VAC/180~260VAC selected by switch 47~63Hz; 260~370VDC |
AC Current |
13A/115VAC 8.0A/230VAC |
Efficiency |
80% |
81% |
85% |
87% |
Inrush Current |
60A/230V |
Leakage Current |
3.5mA/240VAC |
|
|
PROTECTION |
|
Over Load |
110%~135% |
Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover |
Over Voltage |
110%~135% |
Protection type: Shut down o/p voltage, re-power on to recover |
Over Temp |
TSW1 (Power transistor) When temp. >100ºC, shut down o/p voltage, re-power on to recover |
|
|
ENVIRONMENT |
|
Working Temp., Humidity |
-10ºC~+65ºC; 20%~90%RH |
Storage Temp., Humidity |
-20ºC~+85ºC; 10%~95%RH |
Vibration |
10~200Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
|
|
SAFETY |
|
Withstand Voltage |
I/P-O/P, I/P-FG:1500VAC |
Isolation Resistance |
I/P-O/P, I/P-FG, >100M Ohms / 500VDC |
|
|
STANDARD |
|
Safety Standard |
Design refer to UL1950,CSA22.2,IEC60950 |
EMC Standard |
Design refer to FCC Part 15 Class A |
|
|
OTHERS |
|
Dimension |
291*132*68mm(L*W*H) |
Weight |
2.57Kg |
Packing |
6pcs/15.42kg/CARTON |
|
|
NOTE |
|
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
SCN-800 Input AC 110V 220V Single Output DC 12V 60A Switching Power Supply