150W Single Output with PFC Function SP-150 series
Features:
·Universal AC input/ full range
·Built-in active PFC function,PF>0.95
·Protections: Short circuit/ Over load/ Over voltage/ Over temperature
·Forced air cooling by built-in DC fan
·Fixed switching frequency at 100KHz
·2 years warranty
Product Parameters
SPECIFICATIONS |
OUTPUT |
|
Model |
SP-150-5 |
SP-150-7.5 |
SP-150-12 |
SP-150-13.5 |
SP-150-15 |
SP-150-24 |
SP-150-27 |
SP-150-48 |
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
Rated Current |
30A |
20A |
12.5A |
11.2A |
10A |
6.3A |
5.6A |
3.2A |
Current Range |
0-30A |
0-20A |
0-12.5A |
0-11.2A |
0-10A |
0-6.3A |
0-5.6A |
0-3.2A |
Rated Power |
150W |
150W |
150W |
151.2W |
150W |
150W |
151.2W |
153.6W |
Ripple & Noise |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
150mVp-p |
150mVp-p |
250mVp-p |
DC Adjustment Range |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
-5%,+10% |
Voltage Tolerance |
±2% |
±2% |
±2% |
±2% |
±2% |
±1% |
±1% |
±1.0% |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load Regulation |
±1% |
±1% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Setup, Rise, Hold Up Time |
700ms,400ms,20ms at full load |
Voltage Range |
85~264 VAC 47-63Hz;120~370VDC |
AC Current |
2.5A/115 VAC 1.2A/230VAC |
Power Factor |
PF>0.93/230VAC,PF>0.97/115VAC at full load |
Efficiency |
77.5% |
81% |
84% |
84% |
85% |
85% |
85% |
85% |
Inrush Current |
Cold start 45A/230VAC |
Leakage Current |
<2mA/240VAC |
Over Load |
105%-150% rated output power |
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
Over Voltage |
110%~135% |
Protection type: Shut down o/p voltage, re-power on to recover |
Over Temp. |
TSW1(Power transistor) When temp .in 95±5 ºC shutdown o/p voltage temp . <95±5 ºCO/I auto-recovery. |
Function |
|
Remote Control (option) |
CN1:4~10VDC POWER ON, <0~0.8VDC POWER OFF |
Working Temp. Humidity |
-10ºC~+55ºC; 20%~90% RH non-condensing |
Storage Temp. Humidity |
-20ºC~+85ºC; 10%~95% RH |
Temp. Coefficient |
±0.05%/ºC(0~50ºC) |
Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG: 0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25ºC/70% RH |
Safety Standard |
Design refer to UL60950-1,TUV EN60950-1 |
EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024, light industry level, criteria A |
Dimension |
199*99*50mm(L*W*H) |
Weight |
0.76Kg;20pcs/16.4kg/1.28CUFT |
NOTE |
All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. Tolerance: includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Product Description
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
![Sp-150 Edition Diagram Mode Edition Pdf 12V 100A Power Supply with Pfc Function](//www.micstatic.com/athena/img/transparent.png)
3. Good Service: We treat clients as friend2. OEM/ODM Accepted: We can produce any your design
1. Low MOQ: It can meet your promotional business very well
4. Good Quality: We have strict quality control system. Good reputation in the market
5. Fast & Cheap Delivery: We have big discount from forwarder (Long contract)
6. Professional Service: From inquiry ->make sample ->start order ->inspecation ->delivery
Mr. Micheal