Lpv-100-24 Single Output AC to DC Waterproof Power Supply Whit CE RoHS

Product Description

Led waterproof power supply 100W 24V 4.2A which model number is LPV-100-24
100W Waterproof Single Output Switching Power Supply    LPV-100 series
Features:
Constant voltage design
Universal AC input/Full range
Withstand 300VAC surge input for 5 seconds
Protections: short circuit/ over load/ over voltage
Cooling by free air convection
Small and compact size
Fully encapsulated with IP67 level
Fully isolated plastic case
Suitable for LED lighting and moving sign applications
100% full load burn-in test
Low cost, high reliability
2 year warranty
 

Product Parameters

 

SPECIFICATIONS
OUTPUT
Model	LPV-100-5	LPV-100-12	LPV-100-15	LPV-100-24	LPV-100-36	LPV-100-48
DC Voltage	5V	12V	15V	24V	36V	48V
Rated Current	12A	8.5A	6.7A	4.2A	2.8A	2.1A
Current Range	0-12A	0-8.5A	0-6.7A	0-4.2A	0-2.8A	0-2.1A
Rated Power	60W	102W	100.5W	100.8W	100.8W	100.8W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	150mVp-p	150mVp-p	150mVp-p
Voltage Tolerance	±8%	±5%
Line Regulation	±1%
Load Regulation	±6%	±2%
Setup, Rise Time	2000ms, 25ms/230VAC   2000ms, 25ms/115VAC
Hold Up Time	50ms/230VAC   14ms/115VAC at full load
Voltage Range	90~264VAC   47-63Hz; 127~370VDC
AC Current	2.2A/115V   1.2A/230V
Efficiency	80%	85%	87%	88%	88%	89%
Inrush Current	Cold Start 75A at 230VAC
Leakage Current	0.25mA/240VAC
Over Load	110-150% rated output power
	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75-6.75V	13.8-16.2V	17.25-20.25V	27.6-32.4V	41.4-48.6V	55.2-64.8V
	Protection type: Shut down o/p voltage, re-power on to recover
Working Temp.Humidity	-25 ~ +70ºC (Refer to "Derating Curve") 20-90% RH non-condensing
Storage Temp.Humidity	-40ºC~+80ºC; 10%~95%RH
Temp.Coefficient	±0.03%/ºC(0~50ºC)
Vibration	10~500Hz,2G 10min,/1cycle,period for 60min,each along X,Y,Z axes
Withstand Voltage	I/P-O/P:3KVAC
Isolation Resistance	I/P-O/P>100M Ohms / 500VDC / 25ºC / 70% RH
Safety Standard	UL8750, CSA C22.2 No.250.13-12, UL879,CSA C22.2 No.207-M89, IP67 approved, design refer to EN60950-1
EMC Standard	EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A
Dimension	190*52*37mm(L*W*H)
Weight	0.63kg;20pcs/13.6kg/0.55CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Derating may not be needed under low input voltage. Please check the static characteristics for more details.

Product Description