Ldv-150 150W 110V/220V AC to 12V/24V DC Power Supply for LED Driver

Product Description

Product Description

Product Parameters

 

SPECIFICATION
OUTPUT
Model	LDV-150-5	LDV-150-12	LDV-150-24	LDV-150-48
DC Voltage	5V	12V	24V	48V
Rated Current	30A	12A	6A	3A
Current Range	0-30A	0-12A	0-6A	0-3A
Rated Power	150W	150W	150W	150W
Ripple & Noise	120mVp-p	120mVp-p	120mVp-p	120mVp-p
Voltage Adj. Range	±10%	±10%	±10%	±10%
Voltage Tolerance	±1%	±1%	±1%	±1%
Inlet Stability	±0.5%	±0.5%	±0.5%	±0.5%
Load Stability	±0.5%	±0.5%	±0.5%	±0.5%
Setup, Rise, Hold Up Time	800s,50ms,10ms/115VAC   300ms,50ms,80ms/230VAC
Voltage Range	110VAC   50-60Hz
Efficiency	76%	79%	83%	83%
Inrush Current	Cold-start current 30A/115V   60A/230V
Over Load	105%~150%
	plusing hiccup shutdown Reset:auto recovery
Working Temp., Humidity	-10ºC~+60ºC(Refer to output derating curve),20%~90%RH
Storage Temp., Humidity	-20ºC~+85ºC, 10%~95%RH
Temp. Coefficient	±0.03%/ºC(0-50ºC)
Vibration	10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes
Withstand Voltage	I/P-O/P: 3KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
Safety Standard	UL1012TUV EN60950(IEC950,UL1950) Approved IP67
EMC Standard	CLSPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification
OTHERS
Dimension	242*67*44mm(L*W*H)
Weight	1.23Kg
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.