MDR-10-24 10W 24V 0.42A din rail power supply
Product Description
Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
2 years warranty
Model series:
MDR-10-5 / MDR-10-12 / MDR-10-15 / MDR-10-24
MDR-20-5 / MDR-20-12 / MDR-20-15 / MDR-20-24
MDR-40-5 / MDR-40-12 / MDR-40-24 / MDR-40-48
MDR-60-5 / MDR-60-12 / MDR-60-24 / MDR-60-48
| SPECIFICATIONS |
| OUTPUT |
| Model |
MDR-10-5 |
MDR-10-12 |
MDR-10-15 |
MDR-10-24 |
| DC Voltage |
5V |
12V |
15V |
24V |
| Rated Current |
2A |
0.84A |
0.67A |
0.42A |
| Current Range |
0-2A |
0-0.84A |
0-0.67A |
0-0.42A |
| Rated Power |
10W |
10W |
10W |
10W |
| Ripple & Noise |
80mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
| Voltage Tolerance |
±5% |
±3% |
±3% |
±1% |
| Line regulation |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Load regulation |
±5.0% |
±3.0% |
±2.0% |
±2.0% |
| Setup, Rise Time |
500ms,30ms/230VAC 1000ms,30ms/115VAC at full load |
| Hold Up Time |
120ms/230VAC 25ms/115VAC at full load |
| INPUT |
| Voltage Range |
85~264VAC 47~63Hz; 120~370VDC |
| AC Current |
0.33A/115VAC 0.21A/ 230VAC |
| Efficiency |
77% |
81% |
81% |
84% |
| Inrush Current |
Cold start 35A/115V 70A/230V |
| Leakage Current |
<1mA/240VAC |
| PROTECTION |
| Over Load |
Above 105% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage |
5.75-6.75V |
13.8-16.2V |
17.25-20.25V |
27.6-32.4V |
| Protection type: Shut down o/p voltage, re-power on to recover |
| ENVIRONMENT |
| Working Temp., Humidity |
-20ºC~+70ºC; 20%~90% RH non-condensing |
| Storage Temp., Humidity |
-40ºC~+85ºC; 10%~95%RH |
| Temp. Coefficient |
±0.03%/ºC(0~50ºC) |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
| Withstand Voltage |
I/P-O/P: 3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-F/G: 100M Ohms / 500VDC/25ºC/70% RH |
| STANDARD |
| Safety Standard |
Design refer to UL508,TUV EN60950-1 |
| EMC Standard |
Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-1,EN61204-3, light industry level, criteria A |
| OTHERS |
| Dimension |
22.5*90*100mm(W*H*D) |
| Weight |
0.17Kg |
| Packing |
72pcs/carton/13.2kg/0.91CUFT |
Note:
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Shirley Contact information
Any questions
please be free to contact Shirley at :
){kind=link}